Not amateur radio
Node roles
Companions, repeaters and room servers, and why end devices do not relay.
Not amateur radio
Companions, repeaters and room servers, and why end devices do not relay.
MeshCore gives each device one fixed job, set by the firmware you load on it. The project's README puts the reason plainly: companion nodes "are not repeating messages at all to prevent adverse routing paths from being used."
| Role | What it does | Repeats packets? |
|---|---|---|
| Companion | The messaging end of the network. Connects to a phone app over Bluetooth, or to a computer over USB serial | No |
| Repeater | Forwards MeshCore packets toward their destination | Yes, selectively |
| Room server | A simple bulletin board that stores posts and hands them out later | Only if switched on, and that is not recommended |
The FAQ answers "Do MeshCore clients repeat?" with a flat no: it calls this "the core of MeshCore's messaging-first design", meant to stop devices flooding the airwaves and creating endless collisions. So the only devices that carry other people's traffic are the ones someone has deliberately set up as repeaters, usually placed high up. See Device roles for how Meshtastic handles relaying.
A repeater's job is to forward MeshCore packets to the destination device. It does not retransmit every packet it hears: with a learned path in the packet, only the repeater that matches the next hop passes it on (see Path routing). Administrators can also tell a repeater to refuse flood traffic beyond a chosen hop limit, so each repeater's owner sets its rules.
Practical points from the FAQ:
The FAQ compares a room server to an email server. A channel message is heard when it is sent or missed if you are out of range, but a room server stores the history so a roaming user can come back later and catch up. When a client logs in, it receives the previous 32 unseen messages.
A room server can be told to repeat, but the FAQ says this is neither recommended nor encouraged, because it lacks the full set of repeater and remote-administration features. Its advice is to run a repeater and a room server on separate devices.